Elektrine lite

← Feed

@Akshay@eupolicy.social

2026-06-22 20:53 UTC

@icanbob@techhub.social Wait, how does that work? In the Netherlands, a CCGT might have 50-60% efficiency and more if waste heat is used. Heatpumps are ~3-5X more efficient than boilers. So isn't this much better than canceling out the CCGT inefficiency? And while renewables drop from over 50% in June to just over 40% of the EU grid in December, they don't drop to zero, and you can add the 20-25% nuclear to that. So the EU grid is majority low carbon even in winter. https://ember-energy.org/latest-insights/european-electricity-review-2026/2025-at-a-glance/

Replies (1)

  • @icanbob@techhub.social 2026-06-23 01:09

    @Akshay@eupolicy.social You are correct. There are efficient gas turbines on some grids. However the typical peaker gas turbine has an efficiency closer to 35%. My GSHP has an operational COP of ~3. Those offset. Air source heat pumps at Ontario winter temps have much poorer COP. Most people in Ontario installing air sourced heat pumps use their existing gas furnace as cold weather supplementation. The issue with renewables is not that they drop to zero seasonally, but rather they drop below the load demands at those points in time and have to be backstopped with gas generation in many grids. To truly analyze JIT grids one needs to match instantaneous load to instantaneous supply. Using aggregated stats of percentages of load supplied masks out this physical fact. Here is a study I did using real data from my home and a nearby solarPV installation. The aggregated annual kWh produced by the solar array more than matched the aggregated kWh usage by my home. The problem was most of that solarPV output was 6 mo out of phase with my GSHP heating needs. https://energyasicit.ca/solarPVpaper2/

    Open ##5254461