2026-08-06 13:58 UTC
I/ ⚡ Flash and configure a #reticulum stack+software on a board:
- the "rnode way" on ESP32 or nRF52:
rnodeconf --autoinstall --fw-url https://github.com/attermann/microReticulum_Firmware/releases/
-> at least a dozen implementations/stacks available already, with their own ways of flashing...
- to make transport node, the rnode/microreticulum way:
nodeconf --tnc --freq 869475000 --bw 125000 --sf 7 --cr 5 --txp 19 /dev/ttyACM0
(sets Berlin consensual radio parameters and --tnc < transport node)
4/9
Replies (1)
-
@jz@piaille.fr 2026-08-06 13:58
II/ 🌤️ Put it in a solar enclosure: - DIY from scratch (5-6Euros junction box + batteries + solar/charge controller + sealed holes for antennas, etc + slap and seal a solar panel, labour et voila! -> 20ish Euros + the board - bought ready-made as a meshtastic node containing the right board ("meshtastic kit"), or quasi-ready, like easty to convert integrated solar chargers for 18650 -> 40ish Euros + the board 5/9